GEAR HOBBING & SLOTTING MACHINE >>
MANUAL GEAR HOBBING MACHINE
KTM GEAR HOBBING MACHINE MODEL KDP-20


AUTO CYCLE GEAR HOBBING MACHINE KDP-20

This model precision gear, sprocket, spline shaft, designed for the production of worm wheel and the other tooth profile factor.
Rough cutting, finishing, and equipped with your appropriate hobbing machines, whether one or thousands of the same type gear.

Automatic hobbing cycle

The automatic hobbing cycle makes the machine most suitable for the requirements of high production.
It can be utilized for conventional or climb cutting and cutting with table in feed (worm wheels).
The operator is just required to load and unload workpieces and push the start button.
The hydraulic lifting and lowering of the support bracket can be included in the automatic cycle.

Differential gear

Each machine has a differential to cut helix angles of up to 45 degrees.
A complete set of change gears together with a storage cabinet is part of the stand¬ard equipment.

Rigid Machine Frame-Hardened and Ground Guideways

The sturdy machine frame, reinforced by numerous ribs, provides the necessary rigidity during heavy cuts.
All guideways arc hardened and ground to minimize wear and to guarantee high accuracy and a long machine life.

Dual-lead worm gear

The worktable is driven by a hardened and fround dual lead worm to minimize acklash.
The wormwhccl is precision cut on a parent machine used exclusively for this purpose.
When backlash adjustment becomes necessary after years of use, it can be easily performed from the outside, by microshifting the masterworm in its axial direction.

Powerful hob head

The rigid box type hob head houses the hardened and precision ground head gear and pinion with its oil bath lubrication.
The hob is powerfully driven by a single speed motor, wired to suit your electrical requirements.
Eight hob speeds and a wide selection of feeds allow cutting under the most suitable conditions.
Manual hob shifting is easily and quickly carried out by the operator by use of a micro collar and graduated scale.

Easy Operation

The machine controls are conveniently arranged in a way to allow the operator to closely watch the cutting process while handling the controls.
All scales and dials be supplied ir in cither the metric or inch system.


SPECIFICATION
DESCRIPTION
KDP-20
Hobbing Capacity. Max. Diameter Without Support

660m (26")

Hobbing Capacity. Max. Diameter With Support

490m (19 1/4")

Hobbing Capacity. Max. Pitch

M.P.6 (D.P.4)

Max. Travel Of Hob Saddle

380mm (15.35")

Diameter Of Table

495mm (19 1/2")

Max. Diameter Of Hob

120mm (4 11/16")

-Max. Length Of Hob

120mm (4 11/16")

Hob Speed Changes (8 Step)

68-220r.p.m

Diameter Of Hob Arbor (Standard Accessory)

27 32mm(1 1/4")

Diameter Of Work Arbor (Standard Accessory)

32mm (1 1/4")

Main Motor

3.7kW (5)

Auxiliary Motor

750W × 2 (1×2)

Floor Space

3,000 × 2,000mm
(89 1/6× 46 1/6)

Machine Height

2,200mm (70")

Net Weight

4,900kg (10,340lbs)

Copyright © 2002 Insung International Corp. All right reserved.
E-mail : insung@insungco.com / Tel : 82-62-371-2242 / Fax : 82-62-371-2262