MILLING MACHINE >>
MANUAL MILLING MACHINE
HEUNG HWAN KNEE TYPE VERTICAL & HORIZONTAL MILLING MACHINE HMK-2/3
HEUNG HWAN KNEE TYPE VERTICAL MILLING MACHINE HMK-2v
STONIC VERTICAL & HORIZONTAL MILLING MACHINE MODEL STM-3C
STONIC VERTICAL MILLING MACHINE MODEL STM-3V


SPECIFICATIONS
DESCRIPTIONS
HMK-2
HMK-3
TABLE WORKING SURFACE (LXW)
1220 X 290mm
1350 X 310mm
T-SOLTS (WXROW)
16mm x 3
16mm x 3
MAX
TRAVEL
LONGITUDINAL (X)
900mm (800mm)
1000mm (900mm)
CROSS (Y)
300mm
370mm
VERTICAL (Z)
450mm
500mm
FEED SPEED STEPS
12 STEPS
12 STEPS
LONGITUDINAL CROSS
15-720
mm/min
15-720
mm/min
PAPID
SPEEDS
LONG CROSS
3000mm/min
3000mm/min
UP DOWN
950mm/min
950mm/min
HORIZONTAL SPINDLE NOSE
NT#40
NT#50
SPINDLE R.P.M STEPS
95~1400 RPM, 9 STEPS
95~1400 RPM, 9 STEPS
VERTICAL SPINDLE NOSE
NT#40
NT#40
SPINDLE R.P.M STEPS
75~3600 RPM, 16 STEPS
75~3600 RPM, 16 STEPS
QUILL VERTICAL TRAVEL
140mm
160mm
TILTING ANGLE
90
90
FEED STEPS OF QUILL
3 STEPS
3 STEPS
FEED OF QUILL SPEEDS
0.14, 0.07, 0.035mm/Rev
0.14, 0.07, 0.035mm/Rev
OVER ARM CRESS TRAVEL
420mm
670mm
SWIVELING ANGLE
360
360
MOTOR MOTOR OF HORIZONTAL SPINDLE
3.7KW(5HP)
3.7KW(5HP) X 220/380v
MOTOR OF VERTICAL SPINDLE
2/1KW(1.2/3HP) X 2/4
2/1KW(1.2/3HP) X 2/4
TABLE
MOTORS
UP DOWN
1.1KW(1.5HP)
1.1KW(1.5HP)
LONGITUDINAL
1.5KW(2.0HP)
1.5KW(2.0HP)
MOTOR OF COOLANT PUMP
60F
60F
WEIGHT MACHINE WEIGHT (APPROX)
2300kg
3200kg
Copyright © 2002 Insung International Corp. All right reserved.
E-mail : insung@insungco.com / Tel : 82-62-371-2242 / Fax : 82-62-371-2262