BOX COLUMN PRODUCTION LINE


A : 400 - 1,000mm A" : 400 - 1,000mm
L : 400 - 15,000 ea T : 19 - 50 mm
W : 10 ton/ea - 12 ton/ea  

Box Column Process Chart As Per Attached


Box Column Operation Flow Chart


Box Column Operation Processing Photos


The Main Equipments For Box Column Manufacturing Line

Our Proposal Main Equipments For The Box Column Manufacturing Is The Min. Required Main Equipments And Other Required Equipments Are Easily Performed By Manual Working Methods

Basic Contents

1. Summary For The Equipments
2. Installation Place
3. Operating Conditions
4. Basic Box Column Specifications
5. Lay-Out Drawing For The Box Column Manufacturing Line
6. Consists Of The Equipments
7. Gas Cutting And Bevel Process ( C.N.C. Gas Cutting Machine )
     = 4,100 x 18,000 mm Table Size With 10 Gas Torches & 2 Bevel Torches
8. Diaphragm Manufacturing Process ( Welding Positioner )
     = Recommending By Manual Operation
9. Web Seal Plate Assembling Machine
     = Recommending By Manual Operation
10. U & Type Assembling Machine With Centering Machine
     = Assembly & Co2 Welding
11.Corner Welding Process (Twin Tandem Submerged ARC Welder Machine)
     = 4 - Poles Gantry Type Automatic Welding Machine
12. Turning Machine : 40 Ton Capacity
     = Turning Operation For The Corner Welding And Hole Drilling
13. Hole Drilling Process : By Radial Drilling Machine
     = Drilling Arm 2,000 mm Length
14. Sensnet Welding Process By Sesnet Welding Machine
     = 2 - Poles Gantry Type Automatic Welding Machine
15. Facing Process By Facing Machine
     = recommending by manual grinding operation

C.N.C. Gas Cutting Machine : 4,100 X 18,000 mm Table

Large sized oxygen cutting machine
- This large sized O2 cutting machine equipped with powder marking function is suitable for mass production of regular shapes.

Gas distributor
- Supply or shut the gas and O2 for each torches
Controller & Operating Panel

Welding Process For The Diaphragm Manufacturing

Web Seal Plate Assembly Machine

Centering Machine Device

Box Column Assembly Machine

Twin Tandem Submerged A.R.C Welder Machine For Corner Welding

Turning Machine For 40 Ton Loading Capacity

Radial Drilling Machine For 2,000 Arm Length

2 - Pole Gantry Type Sesnet Welding Machine

Facing Machine - Facing Milling Process
 
Copyright © 2002 Insung International Corp. All right reserved.
E-mail : insung@insungco.com / Tel : 82-62-371-2242 / Fax : 82-62-371-2262